VIOFO MT1 Review: Dual 1080p Motorcycle Protection That Just Works
Riding leaves you exposed in a way driving never does. If a car merges into your lane or brake-checks you, there is often no proof it happened, just your word against a driver who barely saw you. The VIOFO MT1 was built to fix that, a purpose-made waterproof 2-channel camera that records the road ahead and behind on every ride, without fuss, without having to remember to hit record, without having to charge it after every ride and without breaking the bank.
In this VIOFO MT1 review we will cover what it records, how it copes with weather and the dark, its features, who it suits, and the one accessory we will not let you skip.
What does the VIOFO MT1 record?
The MT1 is a 2-channel camera, which means it records two views at once: the road ahead and the road behind. Both the front and rear cameras record in 1080p Full HD at 30 frames per second. Frames per second is the number of still images the camera grabs each second, and 30fps is smooth and plenty for a bike camera.
Here is the clever part. Both cameras use Sony STARVIS sensors, the same low-light chip family found in far pricier cameras. The sensor is the chip that turns light into a picture, and it is why reviewers describe the MT1's Full HD footage as sharp day, dusk and night, well beyond what the modest 1080p number suggests. Each camera also has a wide 170-degree field of view, so you capture the full width of the road and the traffic beside you.
Will it survive the weather and the road?
Yes, and that is the whole point of a purpose-built bike camera. The MT1 carries an IP66 waterproof and dustproof rating, which in plain terms means it is sealed against dust and can handle heavy rain and road spray. You do not need to cover it up when the weather turns, which is exactly how it should be on a bike.
It also has a built-in G-sensor, a motion sensor that detects a sudden jolt and automatically locks the current clip so it cannot be recorded over, whether you are riding or parked.
The features that earn their keep
The MT1 is screenless and controlled by a wired handlebar remote, so you can lock a clip or start and stop recording without taking a hand off the bar for long. It has built-in GPS, which stamps every clip with your speed, location and route, which is genuinely useful proof if a driver claims you were speeding.
It has Wi-Fi built in, so you can connect to the VIOFO app on your phone to review and download footage. One honest note worth knowing: the microphone sits on the remote button, so at idle it can struggle to pick up a roadside conversation unless voices are raised. For a bike camera, where wind and engine noise dominate anyway, that is a minor trade. The MT1 also comes with a 32GB card in the box, which holds around two and a half hours at the highest quality, so most riders upgrade the card, which we will get to. Setup and troubleshooting is covered in our VIOFO MT1 user manual and troubleshooting guide.
What accessories should you add to the MT1?
A motorcycle camera wires to your bike, so there is no hardwire kit to buy, but one thing matters more than anything else.
The right memory card. The 32GB card in the box is fine to get going, but at roughly two and a half hours it fills fast, and constant vibration and heat on a bike are hard on cheap cards, which are the number one cause of corrupted or missing footage we see. We only recommend a genuine high-endurance card, and a 128GB card is the sweet spot for the MT1's dual 1080p, giving you far more riding time before it loops over the oldest clips. Browse the VIOFO compatible memory cards we stock so yours never lets you down.
The install itself is the other thing worth getting right, since the camera powers from the bike and the cables need routing neatly. Our motorcycle dash cam setup guide covers a clean, tidy fit.
Who should buy the VIOFO MT1?
This is the camera for the rider who wants proven, reliable protection and sharp footage without paying flagship money. Commuters, weekend riders, and anyone who wants a set-and-forget camera that records every ride will be well sorted. Reviewers consistently call it excellent value, and that matches what we see. You can compare it against the rest of our motorbike dash cam range to be sure.
If you want the most detail up front and do not mind paying a bit more, it is worth reading our VIOFO MT1 vs Vantrue Falcon F1 comparison before you decide.
The verdict
The VIOFO MT1 nails the brief. Dual Sony STARVIS 1080p footage that looks better than the spec sheet suggests, proper IP66 waterproofing, GPS, Wi-Fi and a handlebar remote, all at a price that makes it easy to say yes. Upgrade the card to a genuine high-endurance one and it will quietly protect you, ride after ride.
Every camera we sell is genuine Australian stock, ships from Melbourne, and is backed by local support and warranty, so you are never chasing an overseas seller if you need a hand.
Not sure if the MT1 or the Vantrue Falcon F1 is the right call for your bike? Give Michael or Harrison a yell. We spec, supply and support these on Australian roads, and we are happy to talk it through with no pressure and no worries.
Last reviewed: 19 August 2026. The Dash Cam Guys is an Australian dash cam retailer and the VIOFO MT1 is a camera we sell, so please read this as retailer buying advice rather than an independent survey of the market. VIOFO did not pay for, sponsor or supply this review. The sensor, waterproofing rating and connectivity figures quoted here are VIOFO's own published specifications rather than our own laboratory measurements, and our comments on how the footage looks are impressions from using the camera, not controlled testing. If a specification, a feature or a price on this page is wrong or has gone out of date, tell us and we will correct it.